Filter
Top Products
e
Removing Jammed Staples
293
5
e
Removing Jammed Staples
Note
❒
Staples might be jammed because of curled copies. In this case, try turning the
copy paper over in the tray. If there is no improvement, change the copy pa-
per with less curls.
❒
After removing jammed staples, staples might not be ejected the first few
times you try to use the stapler.
❒
If the optional booklet finisher is installed, initialize the staple unit for the
Saddle Stitch function with the User Tools (System Settings) after adding sta-
ples or removing jammed staples. If you do not, misfeeds might occur. See
“Staple initialization” in the System Settings manual.
50-Sheet Finisher
• 1: Open the front cover of the finisher.
• 2: Pull out the staple unit.
• 3: Lift the cartridge until it clicks.
R7
ZBQP610E
ZBQP620E