Filter
Top Products
95
Copying
Image Creation
Slanted Image—Slanting the Copy Image
This function slants the copy image at a selected angle.
Note
❐ The slant direction is decided as shown in the illustration.
❐ You can select the angle from –45° to +45°.
❐ Depending on the angle, some parts of the image may be lost.
1
Press the [Image Creation] key.
2
Press the [Slanted Image] key.
3
Adjust the angle by pressing the arrow keys.
Note
❐ By pressing the [ ] or [ ] key, the number of the
angle can be adjusted by in steps of 5°.
❐ By pressing the [ ] or [ ] key, the number of the
angle can be adjusted by in steps of 1°.
❐ To cancel the angle, press the [Clear] key.
4
Press the [OK] key.
5
Set your originals, then press the Start key.