Filter
Top Products
129
Adjustment and Color
Memory
Color Balance—Adjusting and Storing the Color Balance
2
Make sure the [Color Balance] key is selected.
3
Press the [Color Balance Sample] key.
4
Select the range of densities (standard is the
current setting).
5
Set your original on the exposure glass.
6
Press the [Sample Area Selection] key.
7
Press the [Scan Start] key.
Note
❐ The image of the original is displayed.
8
Point at the center of the area with the editor
pen, then press the [OK] key.
Note
❐ For details about this display, ☛ see page 142.