Filter
Top Products
229
Projector Unit
Operation
Adjusting the Color Tone/Brightness Using Negative Film
❐ When you copy negative film, adjust the color tone (density of yellow, magenta, and cyan) and brightness (quantity of
light) according to the table below. However, even when you use the same type of film, you must use different settings
depending on the way the original picture is taken or developed. If you cannot make copies as you want, perform
adjustment.
❐ You can also use the “Color Balance Adjustment” function of the copier to correct slight color difference.
☛ See page 124.
♦ The following table uses these values to indicate the color tone and brightness levels (the crosshatched values ( )
are the default settings):
Yellow (Y) Lighter ← 1 2 3 4 5 6 7 8 9 → Darker
Magenta (M) Lighter ← 1 2 3 4 5 6 7 8 9 → Darker
Cyan (C) Lighter ← 1 2 3 4 5 6 7 8 9 → Darker
Density Lighter ← 1 2 3 4 5 6 7 8 9 → Darker
Manufacturer FUJI COLOR Kodak
Film type
SUPER G ACE *3
SUPER V *4 SUPER G *5
REALA ACE *6
GOLD *7
ROYAL GOLD *8
GOLD *9
ISO sensitivity 100 400 800 100 200 800 100 200 400 100 400 800
Y 555 4 3 5 455 5 5 5
Color M 5 5 5 5 5 6 7 7 6 7 5 6
C 55 5 3 3 5 665 6 5 5
Density *1 6 4 5 6 5 4 5 4 5 5 5 5
Density *2 5 3 4 5 4 3 4 3 4 4 4 4
Manufacturer Konica AGFA
Film type LV *10
COLOR JX *11
COLOR HDC *12
ISO sensitivity 100 200 100 200M 400 100 200 400
Y 3 345 5 468
Color M 6 5 7 4 5 5 6 5
C 5 454 3 552
Density *1 5 5 6 5 5 5 4 5
Density *2 4 4 5 4 4 4 3 4
• Density *1 should be used when film is set in the film holder.
• Density *2 should be used when film is set on the exposure glass (platen glass).
*3, *4, *5, *6: These products are registered trademarks of Fuji Photo Film Co., Ltd.
*7, *8, *9: These products are registered trademarks of Kodak Ltd.
*10, *11: These products are registered trademarks of Konica Corporation.
*12: This product is a registered trademark of Agfa Gevaert AG.
Adjusting Color, Density and Focus