Filter
Top Products
192
User Tools
Description
Select the size of the copy paper set in the paper tray.
Note
❐ If the specified paper size differs from the size of paper actually set in the paper tray, a
paper misfeed might occur because the paper size is not detected correctly.
Reference
For details, ☛ see page 238.
You can select the paper tray which will be selected as a default in the following
conditions:
• When the main power switch or operation switch is turned on.
• When System Reset or Auto Reset mode is turned on.
• When the
Clear Modes key is pressed.
• When the Auto Paper Select mode is not selected.
Note
❐ Default: Tray 1
If you load paper of the same size in two or more trays, the machine automatically
shifts another tray when the tray in use runs out of paper. You can set or cancel this
setting.
Note
❐ Default: Off
❐ This function is not available in Area Editing Mode.
By default, you can make the interrupt copies. You can cancel this setting.
Note
❐ Default: On
When this mode is off, narrow margins on all 4 sides of the original are not copied.
When you turn it on, margins 1, 2 and 3 are copied.
Note
❐ Default: Off
❐ You cannot cancel the leading edge margin (margin 4).
Menu
Tray Paper Size
Paper Tray Priority
Auto Tray Switching
Interleave Print
3 Side Full Bleed
1: 2 ± 2mm, 0.08" ± 0.08"
2: 2 ± 2mm, 0.08" ± 0.08"
3: 2 ± 2mm, 0.08" ± 0.08"
4: 4 ± 2mm, 0.16" ± 0.08"