Filter
Top Products
118
6
Press the [Confirm Selection] key.
7
Mark diagonally opposite corners of destination
area.
8
Press the [Confirm Selection] key.
9
If you want to edit the image, press the [Edit
Overlay Image] key.
Note
❐ If you want to edit the background original, press the
[Edit Background] key. For details, ☛ see page 121.
❐ If you want to change the job settings, press the [Ba-
sic Settings] key. For details, ☛ see page 122.
0
If you want to adjust the color/image adjustment,
press the [Color/Image] key.
!
Make any adjustments you require.
Note
❐ Image Density, ☛ see page 39.
❐ Color Mode, ☛ see page 40.
❐ Original Type, ☛ see page 44.
❐ Image Adjustment, ☛ see page 132.
❐ Color Adjustment, ☛ see page 131.
❐ Color Balance Adjustment, ☛ see page 124.
@
Press the [OK] key.
#
If you want to adjust the color creation, press
the [Color Creation] key.
$
Make any adjustments you require.
Note
❐ Color Conversion, ☛ see page 85.
❐ Color Erase, ☛ see page 87.
❐ Color Background, ☛ see page 88.
Press the [OK] key.
Press the Start key.
Area Image Overlay (Only for Edit Type)