215
Projector Unit
Operation
Positioning the Projector
Positioning the Projector
Note
❐ Do not touch the fresnel lens or the glass on the mirror unit. Fingerprints or dirty parts might appear on the copy. If the
fresnel lens becomes dirty, wipe it. ☛ See page 236.
1
Plug the projector into the wall outlet.
2
Turn on the main switch of the projector.
3
Lift the platen cover or the document feeder and
lower the projector lens cover.
4
Place the mirror unit so that the unit’s position
holes fit over the projector’s positioning pins.
Note
❐ Please be careful not to scratch the exposure glass
when setting the mirror unit on it.
5
Slide the mirror unit release lever in the direc-
tion of the arrow and open the mirror unit cover.
1. Lens cover
TRSR0C0E
1
TRSR0D0E
1
2
1
TRSR0E0E
1. Mirror unit
2. Positioning pins
1. Mirror unit release lever