Filter
Top Products
203
Others
Do’s and Don’ts
R
CAUTION:
r
• When you move the machine, unplug the power cord from the wall outlet to avoid fire or electric
shock.
• When the machine will not be used for a long time, unplug the power cord.
• Do not touch areas on or around the fusing unit. These areas get hot.
• After making copies continuously, you might feel the exposure glass is heated. But this is not a malfunction.
• You might feel warm around the ventilation hole. This is caused by exhaust air, and not a malfunction.
• Do not turn off the operation switch while copying. When turning off the operation switch, make sure that copying is
completed.
• The machine might fail to produce good copy images if there should occur condensation inside caused by tempera-
ture change.
• Do not open the covers of machine while copying. If you do, misfeeds might occur.
• Do not move the machine while copying.
• If you operate the machine improperly or a failure occurs on the machine, your machine settings might be lost. Be
sure to take a note of your machine settings.
• Supplier shall not be liable for any loss or damages resulting from a failure on the machine, loss of machine settings,
and use of the machine.
Do’s and Don’ts