Filter
Top Products
195
Changing the Machine’s
Settings
User Tools
Menu
Maximum Copy Quantity
Tone : Original on Platen
Front Side Margin Adjust.
Back Side Margin Adjust.
1→2 Duplex Auto Margin
Adjust.
Magnification Setting
Initial Mode Setting
Show Editor Grid
(Only for Edit type)
Image Rotation
Add Margin in Repeat
Image
Description
The maximum copy quantity can be set from 1 to 999.
Note
❐ Default: Off
The beeper (key tone) sounds when you forgot to remove originals after copying.
Note
❐ Default: Off
❐ When the “Panel Tone” is set to Off, the beeper does not sound even if the “Original
Tone” is set to On.
You can adjust the front side margin direction and width that is selected as a default in
Front Side Margin Adjust. mode.
Note
❐ Default:
• Metric version: left/right 0mm
• Inch version: left/right 0"
You can adjust the back side margin direction and width that is selected as a default in
Back Side Margin Adjust.
Note
❐ Default:
• Metric version: left/right 0mm
• Inch version: left/right 0"
When you use 1 Sided → 2 Sided mode, the machine set the back side margin
automatically.
Note
❐ Default: Off
Up to 2 reproduction ratios which you frequently use can be registered.
1. Press the [Setting] key.
2. Select the [User Ratio 1] or [User Ratio 2] key.
3. Enter your desired ratio with the
Number keys.
Then press the [OK] key.
You can set the machine to recall program setting when the machine is turned on or
when modes are cleared.
Note
❐ Default: Normal
You can turn the grid snap on or off in the display editor. The grids may help you to
mark a right angle shape.
Note
❐ Default: Off
When you use the same size and different direction copy paper, the machine rotates
the original image 90
o
.
Note
❐ Default: On
You can select add margin or not.
Note
❐ Default: On