Filter
Top Products
191
Changing the Machine’s
Settings
User Tools
Setting You can Change with the User Tools (System Settings)
Reference
For how to access the user tools, ☛ see page 187.
System settings
Description
The beeper (key tone) sounds when a key is pressed. This beeper can be turned on or
off.
Note
❐ Default: On
Choose whether the machine beeps when it becomes ready for a copy run after power
up.
Note
❐ Default: On
❐ When the “Panel Tone” is set to Off, the beeper does not sound even if the “Ready/
Tone” is set to On.
The copy counter can be set to show the number of copies made (Up), or the number
of copies remaining to be made (Down).
Note
❐ Default: Up
The machine turns itself off automatically to conserve energy after your job is finished,
after the selected time. This function called “Auto Off”. The time can be set from 1 to
120 minutes.
Note
❐ Default: 60 minutes
The machine enters Energy Saver mode automatically after your job is finished, after
the selected time. The time can be set from 10 to 990 seconds, or off. In Energy Saver
mode, the panel display turns off.
Note
❐ Default: On (60 seconds)
The machine returns to its prioritized mode automatically after your job is finished, after
the selected time. This function is called “System Reset”. The time can be set from 10
to 990 seconds, or no system reset.
Note
❐ Default: On (60 seconds)
❐ You can specify the prioritized mode with the “Function Priority” user tool. ☛ See
above.
When the “Interleave Print” is set to On, the machine turns the default mode (Copier or
Printer) automatically after your job is finished, after the selected time. The time can be
set from 10 to 990 seconds.
Note
❐ Default: On (60 seconds)
❐ The optional printer is required to use this function.
Menu
Panel Tone
Ready/Tone
Copy Count Display
Auto Timer
Control Panel Off Timer
System Reset Timer
Function Reset Timer