Filter
Top Products
35
Basics
1
Select the copy paper size.
2
Press the [Custom Size Orig.] key.
3
Make sure that the [Orig. Horiz.] key is selected.
Enter the horizontal size with the Number keys,
then press the [#] key.
Note
❐ To change the value entered, press the [Clear] key
and enter a new value.
4
Press the [Orig. Vert.] key and enter the verti-
cal size with the Number keys, then press the
[#] key.
5
Press the [OK] key.
6
Set your original on the exposure glass (platen
glass), then press the Start key.
Setting Non-standard Sized Originals
When copying from non-standard sized originals, enter the original size so that copy is well aligned.
Limitation
❐ You must set your non-standard size originals on the exposure glass (platen glass).
Reference
For the standard sizes the machine can detect, ☛ see page 30.
Note
❐ The dimensions you can enter must be within the following ranges:
Setting Non-standard Sized Originals
Vertical size
Horizontal size
50 - 297mm (in 1mm steps), 2.0" - 11.7" (in 0.1" steps)
50 - 432mm (in 1mm steps), 2.0" - 17" (in 0.1" steps)
[Custom Size Orig.] key