Filter
Top Products
Copying
55
Basic Operation
Energy Saver Mode—Saving Energy
If you do not operate the machine for a certain period after copying or press the Energy Saver key, the
display goes out and the machine enters Energy Saver mode. When you press the Energy Saver key again
and originals are set in the document feeder or when the platen cover or document feeder is opened, the
machine returns to the ready condition. In Energy Saver mode, the machine uses less electricity.
1
Press the Energy Saver key to enter the En-
ergy Saver mode.
Note
❐ To cancel this mode, press the Energy Saver key
again.
Interrupt Copying—Temporarily Stopping one Job to Copy Something Else
Use the Interrupt key to interrupt a copy run and make urgently needed copies.
Reference
For functions that cannot be used together with this function, ☛ see page 106.
1
Press the Interrupt key. The machine will stop
the copy run and store the present settings in
the memory. The machine will return to the ready
condition.
2
Remove the previous originals. Set your original for interrupt copying on the exposure glass (platen glass)
or in the document feeder.
3
Make your copies.
4
After interrupt copying is completed, press the Interrupt key again. The machine will recall the previous
copy settings.
5
Reset the previous originals and press the Start key to resume the previous run.