Ricoh AP306D Printer User Manual


 
Menu Settings
93
5
8.Auto Tray SW (Auto Tray Switch)
You can select whether or not the printer will automatically switch to the oth-
er tray if it has the same paper size as the current tray when paper runs out
while printing.
On
•Off
Note
To use this feature, the optional tray unit should be installed on the printer,
and paper having the same size and direction should be loaded in both the
standard and optional trays.
9.Duplex Print
You can select whether to use the duplex printing or not.
This item can be used only on the duplex printer.
Off
•On
A.Duplex Bind
You can select the binding position of duplex prints.
This item can be used only the duplex printer.
Long Edge
•Short Edge
B.Job Timeout
You can set how many seconds the printer waits before terminating a print
job when the printer does not receive the end of the current print job. The job
is automatically cancelled if time runs out.
000 Off
1 to 999 seconds by 1
C.I/O Timeout
You can set how many seconds the printer waits for more print data before
ending its wait period and terminating a job. The job is automatically can-
celled if no data is received for the selected time.
000 Off
1 to 999 seconds by 1 (300 seconds)
D.Feed Timeout
You can set how many seconds the printer waits for the correct paper size
loaded, when paper runs out while printing. The job is printed with the paper
currently loaded if the correct size is not loaded within the selected time.
000 Off
1 to 999 seconds by 1 (60 seconds)