Filter
Top Products
Troubleshooting
64
4
F
Open the back guide in the du-
plex tray as shown in the illustra-
tion, and then the remove the
misfed paper.
G
Open the guide under the back
guide as shown in the illustration,
and then the remove the misfed
paper.
Important
❒
When removing misfed paper,
handle the guides with great
care.
H
Close the guides opened in steps
F
and
G
.
I
Slide the duplex tray completely
into the printer.
Important
❒
Be sure to insert the duplex tray
completely. If not fully inserted,
misfeeds might occur, or the
front cover might touch the pa-
per tray.
When the Message "Remove
Misfeed From Rear Cover"
Appears
R
CAUTION:
A
Open the rear cover, and then re-
move the misfed paper.
B
Close the rear cover.
Push the center of rear cover until
it rocks.
ZBGY040E
ZBGY041E
•
When removing misfed paper,
do not touch the fusing section
because it could be very hot.
ZBGY090E