Ricoh AP306D Printer User Manual


 
Paper and Other Media Supported by This Printer
25
3
Types of paper and other media
Plain paper
The standard tray can hold up to 250 sheets.
*1
The bypass tray can hold up to 50 sheets.
*1
PAPER FEED UNIT Type305 (option) can hold up to 500 sheets.
*1
*1
: Based on paper that is 80 g/m
2
(20 lb) in weight.
If you print on paper heavier than 105 g/m
2
(28 lb), use the bypass tray.
The bypass tray can hold paper up to 160 g/m
2
(43 lb) in weight.
If paper is curled or bent, straighten it before loading.
When printing on the reverse side of plain paper that is already printed on,
you should load it onto the bypass tray and select
[
Plain (Duplex Backside)
]
from
[
Paper Type:
]
with the printer driver.
Thick paper
If you print on paper heavier than 105 g/m
2
(28 lb), use the bypass tray.
The bypass tray can hold paper up to 160 g/m
2
(43 lb) in weight. The print
quality on paper that is thicker cannot be guaranteed.
The bypass tray can hold up to 25 sheets.
Note
The number of sheets to be set may vary depending on the paper thick-
ness and paper type.
When printing on thick paper, you should select the thick paper mode
with the printer driver.
When printing on the reverse side of thick paper that is already printed on,
you should load it onto the bypass tray and select
[
Thick (Duplex Backside)
]
from
[
Paper Type:
]
with the printer driver.
Auto duplex printing onto thick paper is not available.
Adhesive labels
When printing on adhesive labels, use the bypass tray.
Load adhesive labels into the tray with the print side face down.
TFWY060E