Filter
Top Products
Paper and Other Media Supported by This Printer
27
3
❖
Envelopes
• When printing on envelopes, use the bypass tray.
Note
❒
When you print with RICOH-SCRIPT2 on Macintosh, or from Adobe
PageMaker under Windows, load envelopes with the flap on the oppo-
site (left) side to that shown in the illustration.
• You can select the sizes for the envelopes using the operation panel.
⇒ P.83 “Using the Operation Panel”
• Recommended of envelopes is as follows:
• Com#10 Env
• DL Env
• Do not stack envelopes over the limit mark.
• Confirm that print side is facing down when loading onto the bypass tray.
• Confirm that there is no air in the envelopes before loading.
• To get better print quality, it is recommended that you set the right, left,
top, and bottom print margins, to at least 20 mm (0.8") each.
• Do not print on both sides of envelopes.
• Load only one size and type of envelope at a time.
• Before loading envelopes, flatten the leading edges (sides being fed into
the printer) of them by running a pencil or ruler across them.
• Some kinds of envelopes might cause misfeeds, wrinkles or poor printing.
• The print quality on envelopes may be uneven as different parts of an en-
velope have different thickness. Print one or two envelopes to check the
print quality.
• Avoid using the non-supported envelopes listed on P.28 “Paper not sup-
ported by this printer”.
• Auto duplex printing onto envelopes is not available.
TFWY081E