Administering Printing by User Code
109
5
C
Press
{T}
or
{U}
to display "Maintenance", and then press
{
Enter
}
.
<Menu>
j
Maintenance
l
The following message appears on the panel display.
<Maintenance>
j
1.Reinstall
l
D
Press
{T}
or
{U}
to display "8.Log Protect", and then press
{
Enter
}
.
<Maintenance>
j
8.Log Protect
l
The following message appears on the panel display.
<Log Protect>
j
On
l
E
Press
{T}
or
{U}
to select “On” or “Off”, and then press
{
Enter
}
.
<Log Protect>
j
Off
l
This registers the setting and returns to the “Maintenance” menu.
F
Press
{
On Line
}
.
The "Ready" message appears on the panel display.
Deleting the User Code Record
This procedure describes how to clear the User Code record.
Note
❒
If “Log Protect" is set to "On", you can not delete the User Code record. Select
"Off" in “Log Protect", and then follow the procedure below. ⇒ P.108 “Protect-
ing the User Code Record”
A
Check if the On Line indicator stays on. If not, press
{
On Line
}
.