Ricoh AP306D Printer User Manual


 
Replacing Consumables
79
4
R
WARNING:
R
CAUTION:
Note
Before removing the waste toner
bottle from the printer, spread pa-
per or some other material around
the area you are working to keep
toner from making floor dirty.
A
Turn off the printer’s power
switch.
B
Push the front cover release but-
ton and open the front cover.
C
Holding the green inset grips of
the photoconductor unit, pull the
top of the unit forward.
D
Replace the waste toner bottle.
A
Grasping the waste toner bot-
tle by its green tabs, remove it
from the printer.
B
Insert a new waste toner bottle
at the rear of the photoconduc-
tor unit.
Insert a new waste toner bottle
completely. Otherwise, print
problem may occur.
Do not incinerate spilled toner
or used toner. Toner dust
might ignite when exposed to
an open flame.
Disposal can take place at our
authorized dealer or at appro-
priate collection sites.
If you dispose of the used ton-
er containers yourself, dis-
pose of them according to
your local regulations.
When accessing the inside of the
machine, do not touch any sec-
tions other than those specified
in this manual. If you do, it might
result in receiving a burn or inju-
ry.
TFWX080E
TFWX250E
TFWX330E
TFWX340E