Ricoh AP306D Printer User Manual


 
Using the Operation Panel
100
5
Interpreting the Configuration Page
Interpreting the Configuration Page/IPDL-C
Reference
Firmware Version
This shows the printer firmware version.
Total Installed RAM
This shows the total amount of memory installed in the printer.
Option Interface
This indicates whether there is an optional parallel interface board or Net-
work Interface Board installed in the printer.
Printer Information
Tray1, Bypass Tray
This shows the paper sizes specified with the paper size dial and the opera-
tion panel for the standard paper tray and the bypass tray.
If you install the paper feed unit, it is described as “Tray2” and/or “Tray3”.
Note
If "FRE" is indicated for bypass tray, it means "Custom Size" is set for by-
pass tray. "R" after paper size (A3, for example) means that paper is set in
the short-edge
K
feed direction.
Paper size Indication on the con-
figuration page
A3K A3R
B4 JISK B4R
A4L A4
B5 JISL B5
A5L A5
B6 JISK B6R
A6K A6R
11"
×
17"K DLR
8
1
/
2
"
×
14"K
LGR
8
1
/
2
"
×
11"L
LT