Filter
Top Products
Troubleshooting
42
4
B0:Error An error has occurred in
the optional memory unit.
Turn the printer off and on.
Then, try to print again.
Turn off the printer. Re-
move and reinstall the
memory unit and turn on
the printer. Then, try to
print again.
Turn off the printer. Re-
move the memory unit and
turn on the printer. Then,
try to print again.
Note
❒
If you remove the mem-
ory unit, you must re-
configure the printer
driver.
⇒
the "Setup
Guide" that comes with
the printer
❒
In this case, you might
not be able print com-
plex print jobs.
B1:Error An error has occurred in
the standard parallel inter-
face.
Contact your sales or ser-
vice representative.
B3:Error The printer setting is
wrong.
Reset the printer using
"Menu Reset" of the "Main-
tenance" menu.
⇒
P.83
“Using the Operation Panel”
B5:Error An error has occurred in
the RICOH-SCRIPT2 mod-
ule.
Contact your sales or ser-
vice representative.
B6:Error An error has occurred in
the optional parallel inter-
face board.
Turn off the printer. Re-
move and reinstall the op-
tional parallel interface
board and turn on the
printer. Then, try to print
again.
Message Description Comments