Troubleshooting
66
4
B
Holding the green inset grips of
the photoconductor unit, pull the
top side of the unit forward.
C
Move the light blue charger
cleaner left and right about ten
times, and return it to the left
side. Align the arrow on the
charger cleaner to the arrow on
the photoconductor unit.
Important
❒
If the charger cleaner is not on
the left side, an error message or
print problem might occur.
D
Holding the green inset grips of
the photoconductor unit, push the
unit back to its original position.
E
Close the front cover.
Cleaning the Dust-Proofing
Glass
The dust-proofing glass may require
cleaning if black or white lines appear
on the print side of the document.
R
CAUTION:
A
Push the front cover release but-
ton and open the front cover.
Important
❒
Exposing the photoconductor
unit to light for too long can re-
duce its performance. Clean the
dust-proofing glass as quickly
as possible.
B
Holding the green inset grips of
the photoconductor unit, pull the
top side of the unit forward.
TFWX250E
TFWX260E
•
When accessing the inside of the
machine, do not touch any sec-
tions other than those specified
in this manual. If you do, it might
result in receiving a burn or inju-
ry.
TFWX080E
TFWX250E