1. Configure the machine's default [Reduce/Enlarge] setting.
For details, see p.253 "Copy Settings".
To use this function for the current job only:
1. Configure the setting using the [Reduce/Enlarge] key before starting the current job.
For details, see p.164 "Copying Two or Four Pages onto One Sheet".
Copying both sides of an ID card onto one side of paper
You can copy the front and back sides of an ID card, or other small document, onto one side of a sheet
of paper.
• This function is only available when the original is set on the exposure glass, not when it is set in the
ADF.
CES165
You can either set this machine to always make photocopies in ID card copy mode, or use this function
only when necessary.
Preparation for copying an ID card
To always make photocopies in ID card copy mode:
1. Configure the machine's default [Reduce/Enlarge] setting.
For details, see p.253 "Copy Settings".
To use this function for the current job only:
1. Press the [ID Card Copy] key before starting the current job.
For details, see p.166 "Copying Both Sides of an ID Card onto One Side of Paper".
Making 2-sided copies
You can make 2-sided copies by copying single-sided documents onto the front and back sides of the
paper.
• This function is only available when the original is set in the ADF, not when it is set on the exposure
glass.
1. Guide to the Machine
26
1