Ricoh SP C240SF All in One Printer User Manual


 
Setting the machine to receive an IPv6 address automatically
A DHCP server is required on the network for the machine to receive an IPv6 address
automatically.
1. Press the [User Tools] key.
CES184
2.
Press the [
] [ ] keys to select [Network Settings], and then press the [OK] key.
3. If you are requested to enter a password, enter the password using the number keys,
and then press the [OK] key.
4. Press the [
] [ ] keys to select [IPv6 Configuration], and then press the [OK] key.
5. Press the [ ] [ ] keys to select [DHCP], and then press the [OK] key.
6. Press the [ ] [ ] keys to select [Active], and then press the [OK] key.
7. Press the [User Tools] key to return to the initial screen.
8. If you are requested to reboot the machine, turn off the machine, and then turn it back on.
9. Print the configuration page to confirm the setting.
The IPv6 address setting will appear under “IPv6 Configuration” on the configuration page.
You can press the [Escape] key to exit to the previous level of the menu tree.
A password for accessing the [Network Settings] menu can be specified in [Admin. Tools Lock].
When [DHCP] is activated, manually configured IPv6 address settings are not used.
For details about turning the machine on and off, see p.56 "Turning the Power on".
For details about printing configuration page, see p.287 "Printing the Configuration Page".
For details about [Admin. Tools Lock], see p.295 "Administrator Settings".
Configuring the Machine
77
2