Ricoh SP C240SF All in One Printer User Manual


 
Moving the Machine
This section provides cautions that you must follow when moving the machine both short and long
distances.
If you have to move the machine when the optional paper tray unit is attached, do not push on
the main unit's top section. Doing so can cause the optional paper tray unit to detach, possibly
resulting in injury.
The machine weighs approximately 30.0 kg (66.2 lb.). When moving the machine, use the
inset grips on both sides, and lift slowly in pairs. The machine will break or cause injury if
dropped.
Unplug the power cord from the wall outlet before you move the machine. While moving the
machine, take care that the power cord is not damaged under the machine. Failing to take these
precautions could result in fire or electric shock.
When disconnecting the power cord from the wall outlet, always pull the plug, not the cord.
Pulling the cord can damage the power cord. Use of damaged power cords could result in fire
or electric shock.
When moving the machine after use, do not take out any of the toners, nor the waste toner
bottle to prevent toner spill inside the machine.
Repack the machine in its original packing materials when moving it a long distance.
Be sure to disconnect all cables from the machine before transporting it.
The machine is a precision piece of machinery. Be sure to handle it carefully when moving it.
Make sure to move the machine horizontally. Take extra caution when carrying the machine up or
down stairs.
If tray 2 is installed, remove it from the machine, and move them separately.
Do not hold onto the tray area when lifting the machine.
Moving the Machine
415
10