Filter
Top Products
Control Panel
This section describes the names and usage of the parts of the control panel.
• The actual control panel may look different from the illustration below, depending on the country of
use.
• If the machine remains turned off for a certain period of time (for example, when the power switch
is turned off or when there is a power failure), all documents stored in memory will be lost. If the
Fax Received indicator is lit or flashing, make sure to print out the stored documents before turning
off the power (for example, prior to relocating the machine).
CES167
1. Fax Received indicator
Lights up when received faxes that have not been printed out exist in the machine's memory. Flashes when the
machine is unable to print out the faxes due to machine errors such as an empty paper tray or a paper jam.
2. [Pause/Redial] key
• Pause
Press to insert a pause in a fax number. The pause is indicated by “P”.
• Redial
Press to display the last used scan or fax destination.
3. [On Hook Dial] key
Press to use on-hook dialing to check the destination's status when sending a fax.
4. [Address Book] key
Press to select a scan or fax destination from the Address Book.
5. [Image Quality] key
Press to select scan quality for the current job.
• Copier mode: select Text, Photo, or Mixed.
• Scanner mode: select the resolution.
1. Guide to the Machine
38
1