Ricoh SP C240SF All in One Printer User Manual


 
Error Code Solution
1XXX32 to 1XXX84
An error occurred while sending a fax.
Confirm that the telephone line is properly connected to
the machine.
Disconnect the telephone line from the machine, and
connect a standard telephone in its place. Confirm that
you can make calls using the telephone. If you cannot
make calls this way, contact your telephone company.
If the problem persists, contact your sales or service
representative.
2XXX14
The machine was not able to print the received fax, or the
machine's memory reached capacity while receiving a fax
because the document was too large.
The paper tray was empty. Load paper in the paper tray.
See p.99 "Loading Paper".
The tray set for [Select Paper Tray] under [Fax Features]
did not contain A4, Letter, or Legal size paper. Load
valid size paper in the tray, and configure the paper size
settings under [System Settings] accordingly.
A cover or tray was open. Close the cover or tray.
There was a paper jam. Remove the jammed paper. See
p.358 "Removing Printing Jams".
A print cartridge was empty. Replace the print cartridge.
See p.393 "Replacing Print Cartridges".
The received fax was too large. Ask the sender to re-send
the document in parts as several smaller individual faxes,
or to send at a lower resolution.
2XXX32 to 2XXX84
An error occurred while receiving a fax.
Confirm that the telephone line is properly connected to
the machine.
Disconnect the telephone line from the machine, and
connect a standard telephone in its place. Confirm that
you can make calls using the telephone. If you cannot
make calls this way, contact your telephone company.
If the problem persists, contact your sales or service
representative.
9. Troubleshooting
378
9