Filter
Top Products
• [Back up IPsec Settings] appears only when a password is specified in [Administrator Password].
Restoring the Machine's Settings from a Backup File
Click the [Restore Setting] tab on the administrator settings page to restore the machine's settings from a
previously created backup file.
• When the machine is returned from repair, it is important that you restore the machine's settings
from the backup files. The machine's settings are returned to the default after repair.
Restore Setting
Item Description
File to Restore Enter the path and name of the file to restore, or click [Browse] to select the
file.
Follow the procedure below to restore configuration backup files.
1. Click [Browse].
2. Navigate to the directory containing the backup file to restore.
3. Select the backup file, and click [Open].
4. Enter the administrator password if required.
5. Click [OK].
• If the settings are not restored successfully, an error message appears. Try again to restore the file
completely.
8. Configuring the Machine Using Web Image Monitor
350
8