Filter
Top Products
26
Parameter List
*1 Patchbay works in pairs. Odd-numbered channel can select an odd-numbered input or Lch, and even-numbered
channel can select an even-numbered input or Rch.
Selectable area of the patchbay varies by the select settings of COAXIAL and OPTICAL in the Project parameters.
*2 Valid when Channel Link is “On.”
*3 If Channel Link is On, the “Pan” parameter will change to the offset pan parameter.
*4 Valid when Dynamics Type is “COMPRESSOR.”
*5 Only Input Mixer Channel 1–8 (when sampling frequency is 48/44.1/32 kHz).
Only Input Mixer Channel 1–4 (when sampling frequency is 96/88.2/64 kHz).
*6 Max +6.0dB when compressor auto gain switch is “On.”
*7 Valid when Dynamics Type is “EXPANDER.”
*8 Changes in parameter settings accepted at any time. However, the settings are reflected in the outcome only when the
Equalizer Switch is “On.”
*9 Pre/Pst is switched at the same time by each bus in MASTER EDIT.
*10 Valid when AUX Switch is except “Off.”
*11 Valid when AUX Bus Link is “On.”
*12 “Off” or “Ins” are valid when Channel Link is “On.”
*13 Valid when Effect Insert Switch is except “Off.”
*14 Valid when Surround Mix Switch is “On.”
*15 Valid when Surround Mix Mode is except “2+2.”
*16 Valid when Surround Mix Mode is “3+2+1.”
*17 Valid when Pan Mode is “RSS.” Value changes as follows.
Value increase from 0: 0
→
R3
→
R6
→
...
→
R177
→
180
→
L177
→
L174
→
...
→
L3
→
0
Value decrees from 0: 0
→
L3
→
L6
→
...
→
L177
→
180
→
R177
→
R174
→
...
→
R3
→
0
Equalizer High Mid Q EQ Hi-Mid Q 0.36–
2.00
–16.0 (*5) (*8)
Equalizer High Gain EQ High G -15.0–
0.0
–15.0 dB (*5) (*8)
Equalizer High Frequency EQ High F 1.0 kHz–
10.0 kHz
–20.0 kHz (*5) (*8)
AUX Send Switch AUX (1–8) Off, Pre/
Pst
(*9)
AUX Send Level -
-
∞
–+6.0 (*10)
AUX Send Pan - L63–
C
–R63 (*11)
Direct Path Switch DIR (1–8) 1, ..., 8 (INPUT MIXER CH 1), Off, On
Effect Insert Switch FX1–4
Off
, Ins, InsL, InsR, InsS (*12)
Effect Insert Send Level Snd -
∞
–
0.0
–+6.0 dB (*13)
Effect Insert Return Level Rtn -
∞
–
0.0
–+6.0 dB (*13)
Surround Pan SURROUND PAN L63–
C
–R63 (*14)
Surround Depth SURROUND DEPTH F63–
C
–R63 (*14)
Surround LR:C Rate SURROUND LR:C 0–
50
–100 % (*14) (*15)
Surround Sub Woofer Level SURROUND Sub.W -
∞
–
0.0
–+6.0 dB (*14) (*16)
Parameter name Display
Value,
Initial value
2400_app_e.book 26 ページ ２００５年４月２８日 木曜日 午後１時１４分