Roland VS-2400 Switch User Manual


 
34
Parameter List
Sync Parameter [SHIFT]+[F4 (UTILITY)]
[(Page1) F6 (SYNC)]
* The settable value for Offset will change slightly depending on the MTC type.
Tempo Map [SHIFT]+[F4 (UTILITY)]
[(Page2) F1 (TEMPO)]
Metronome Parameter [SHIFT]+[F4 (UTILITY)]
[(Page2) F2 (Metro)]
*1 Valid when Metronome Out is “INT.”
*2 Valid when Metronome Out is except “Off.”
*3 When the tone type is "CLICK (NOTE)," notes in accordance with the accent note and normal note are output.
*4 Valid when Metronome Out is “MIDI.”
Parameter name Display Value,
Initial value
Sync Mode SYNC MODE
INT
, EXT
Sync with Gap SYNC with Gap
Off
, On
External Sync Source EXT SYNC SOURCE
MIDI IN
, R-BUS
Frame Rate auto select SYNC AUTO
Off
, On
Sync Offset Time SYNC OFFSET TIME
00:00:00:00.00
–23:59:59:29.99(*)
Frame Rate FRAME RATE
30
, 29N, 29D, 25, 24
Error Level ERROR LEVEL 0–
5
–10
MIDI OUT Sync Generator MIDI OUT SYNC Gen.
Off
, MTC, MIDIclk, SyncTr
R-BUS OUT Sync Generator R-BUS SYNC Gen.
Off
, MTC
Parameter name Display Value,
Initial value
Tempo Map Number MAP #
1
–50
Beat BEAT 1/1–16/1, 1/2–16/2, 1/4–
4/4
–16/4, 1/8–16/8, 1/16–16/16
Tempo
=
25.0–
120.0
–250.0
Measure MEASURE
1
–999
Parameter name Display Value,
Initial value
Metronome Out METRONOME OUT
Off
, INT, MIDI
Internal Level INT LEVEL -
0.0
–6.0 dB (*1)
Metronome Mode METRONOME MODE
Rec Only
, Rec & Play (*2)
Tone Type TONE TYPE
CLICK1
, CLICK2, CLICK2(NOTE), DRUM (*3)
Metronome MIDI Channel METRONOME MIDI Ch 1–
10
–16 (*4)
Accent Note ACCENT NOTE C_0–
C#2
–G_9 (*4)
Accent Velocity ACCENT VELOCITY 1–
100
–127 (*4)
Normal Note NORMAL NOTE C_0–
C#2
–G_9 (*4)
Normal Velocity NORMAL VELOCITY 1–
60–
127 (*4)
2400_app_e.book 34 ページ 2005年4月28日 木曜日 午後1時14分