Filter
Top Products
48
Algorithm List
Reverb2
This gate reverb works in either of two modes of gate operation (Gate/Ducking). In the Gate mode, the gate opens
when a certain volume (Threshold Level) is exceeded while in the Ducking mode, the gate opens when the
volume becomes as low as or lower than Threshold Level. You can use two reverbs (FX1 and FX2) with different
settings, or use it in combination with a previous reverb.
fig.08-49
Reverb 2
3BAND EQ
3BAND EQ
Input L
Input R
Direct Level
Direct Level
Output L
Output R
Reverb types
There are five reverb types: You can choose the type with Reverb Type.
Room1: Ordinary room reverb
Room2: Room reverb with a softer tone compared with Room1
Hall1: Ordinary hall reverb
Hall2: Hall reverb with a softer tone compared with Hall1
Plate: Plate reverb
Selecting Gate type
Reverb sounds have different effects depending on the gate operation types. Use Gate Mode to select the type.
Gate: The gate opens when the volume of the direct sound exceeds the value set with
Threshold Level (Thres). The gate closes when the volume drops below the Threshold
Level value.
Duckn: Operates in the opposite manner as in the “Gate” mode. The gate closes when the
volume of the direct sound exceeds the value set with Threshold Value. The gate opens
when the volume becomes as low as or lower than the Threshold Level value.
2400_app_e.book 48 ページ ２００５年４月２８日 木曜日 午後１時１４分