Filter
Top Products
93
Algorithm List
Algorithm List
Stereo Multi
fig.08-47
Parameter (full name) Setting Function
NS (Noise Suppressor): Mutes noise in the silent mode.
Sw (Switch) On, Off Turns the noise suppressor on or off.
Thresh (Threshold) 0–100 Sets the level to start muting noise.
Release (Release) 0–100 Sets the time over which the volume will drop to 0 after the
noise starts being muted.
Cmp (Compressor/Limiter): Compresses the entire output signals when the input volume exceeds a
specified value.
Sw (Switch) On, Off Turns the compressor on or off.
Thrsh (Threshold Level) -60–0 dB Sets the level at which the compressor starts taking effect.
Ratio (Ratio) 1.5:1, 2:1, 4:1, 100:1 Sets the compression ratio applied when the threshold level
is exceeded.
Attack (Attack Time) 0–100 Sets the time from when the input level exceeds the
threshold level to when the effect begins to apply.
Release (Release Time) 0–100 Sets the time from when the input level drops below the
threshold level to when the effect ceases to apply.
Level (Output Level) -60–12 dB Sets the volume of the compressor sound.
Enh (Enhancer): Accentuates the sound and push the sound forward.
Sw (Switch) On, Off Turns the enhancer on or off.
Sens (Sense) 0–100 Sets the degree of the enhancer effect desired.
Freq (Frequency) 1.0–10.0 kHz Sets the frequency at which the enhancer effect starts
working.
MixLvl (Mix Level) 0–100 Sets the amount of the enhancer sound should be mixed
into the direct sound.
Level (Level) 0–100 Sets the volume of the enhancer sound.
Input L
Input R
Output L
Output R
Noise
Suppressor
Noise
Suppressor
3BAND EQ
3BAND EQ
Enhancer
Enhancer
Compressor/
Limiter
Compressor/
Limiter
Continued...
2400_app_e.book 93 ページ ２００５年４月２８日 木曜日 午後１時１４分