Filter
Top Products
79
Algorithm List
Algorithm List
EQ (Equalizer)
Sw (Switch) On, Off Turns the equalizer on or off.
Low Gain (Low Gain) -12– +12 dB Sets the boost/cut amount in the low frequency band.
Low Freq (Low Frequency) 20 - 2000 Hz Sets the center frequency in the low frequency band.
Low Q 0.3–10.0 Sets the width of the area around the low frequency that
will be affected by the gain settings.1 *1
Low Type Shlv, Peak Sets the type of the low frequency band equalizer
(Shlving type or peaking type).
Mid Gain (Middle Gain) -12– +12 dB Sets the boost/cut amount in the middle frequency band.
Mid Freq (Middle Frequency) 200–8000 Hz Sets the center frequency in the middle frequency band.
Mid Q (Middle Q) 0.3–10.0 Sets the width of the area around the middle frequency that
will be affected by the gain settings.
High Gain -12– +12 dB Sets the boost/cut amount in the High frequency band.
High Freq (High Frequency) 1.4–20.0 kHz Sets the center frequency in the High frequency band.
High Q 0.3–10.0 Sets the width of the area around the High frequency that
will be affected by the gain settings.1 *1
Hi Type (High Type) Shlv, Peak Sets the type of the High frequency band equalizer (Shlving
type or peaking type).
Level (Output Level) 0–100 Sets the volume after passing through the equalizer.
Pshift (Pitch shifter): shifts the pitch.
Sw (Switch) On, Off Turns the pitch shifter on or off.
Chromatic Pitch -12–12 Pitch variation (by semitone)
Fine Pitch -100–100 Pitch variation (by cent)
FX Lvl (Effect Level) -100–100 Sets the volume of the pitch shift sound.
DirLvl (Direct Level) -100–100 Sets the volume of the direct sound.
Dly(Delay):Adds a delayed sound to the direct sound, adding depth to the sound or creating special effects.
Sw (Switch) On, Off Turns the delay on or off.
Time (Delay Time) 0–1000 ms Sets the time from direct sound until when the delay sound
is heard.
FBLvl (Feedback Level) -100–100 Sets the amount of the delay sound should be returned to
the delay input.
FX Lvl (Effect Level) -100–100 Sets the volume of the delay sound.
DirLvl (Direct Level) -100–100 Sets the volume of the direct sound.
Cho (Chorus): Adds spaciousness and thickness to the sound.
Sw (Switch) On, Off Turns the chorus on or off.
Rate (Rate) 0.1–10.0 Hz Sets the rate of modulation.
Depth (Depth) 0–100 Sets the depth of modulation.
PreDLY (Pre-Delay) 0–50 ms Sets the time delay from when the direct sound begins until
the processed sound is heard.
FX Lvl (Effect Level) -100–100 Sets the volume of the chorus sound.
DirLvl (Direct Level) -100–100 Sets the volume of the direct sound.
*1: If Low Type (Lo Type) or High Type (Hi Type) is set to “Shlv (Shlving Type),” the setting for Lo Q or High Q is
invalid.
2400_app_e.book 79 ページ ２００５年４月２８日 木曜日 午後１時１４分