Roland VS-2400 Switch User Manual


 
54
Algorithm List
Stereo Pitch Shifter Delay
Changes the pitch of the direct sound. Corrects vocals out of tune or adds thickness to the sound by mixing the
direct sound and a sound at a shifted pitch.
fig.08-12
Parameter (full name) Setting Function
PShift (Pitch Shifter Delay) : Shifts the pitch.
Sw (Switch) On, Off Turns the pitch shifter on or off.
Lch Chroma Pitch (Lch Chromatic Pitch) -12–12 Sets the left-side pitch variation (by semitone).
Rch Chroma Pitch (Rch Chromatic Pitch) -12–12 Sets the right-side pitch variation (by semitone).
Lch Fine Pitch -100–100 Sets the left-side pitch variation (by cent).
Rch Fine Pitch -100–100 Sets the right-side pitch variation (by cent).
Lch PreDly (Lch Pre-Delay) 0–50 ms Sets the time from when the direct sound is output until
when the left-side sound at a shifted pitch is output.
Rch PreDly (Rch Pre-Delay) 0–50 ms Sets the time from when the direct sound is output until
when the right-side sound at a shifted pitch is output.
Lch FBDly (Lch Feedback Delay Time) 0–500 ms Sets the feedback repetition cycle for the left-side delay
sound.
Rch FBDly (Rch Feedback Delay Time) 0–500 ms
Sets the feedback repetition cycle for the right-side delay sound.
Lch FeedbackLvl (Lch Feedback Level) -100–100 Sets the amount of the left-side sound at a shifted pitch
should be returned to the left pitch shifter input.
Rch FeedbackLvl (Rch Feedback Level) -100–100 Sets the amount of the right-side sound at a shifted pitch
should be returned to the right-side pitch shifter input.
Lch CrossFeedbackLvl (Lch Cross-Feedback Level)-100–100 Sets the amount of the left-side sound at a shifter pitch
should be returned to the right-side pitch shifter input.
Rch CrossFeedbackLvl (Rch Cross-Feedback Level)-100–100 Sets the amount of the right-side sound at a shifted pith
should be returned to the left-side pitch shifter input.
FX Lvl (Effect Level) -100–100 Sets the volume of the sound at a shifter pitch.
DirLvl (Direct Level) -100–100 Sets the volume of the direct sound.
Output L
Output R
3BAND EQ
3BAND EQ
Pitch Shifter L
Delay L
Direct Level
Direct Level
Input L
Input R
Pitch Shifter R
Delay R
Setting up pitch
Chromatic Pitch (Chromatic) is used for major pitch variation while Fine Pitch (Fine) is used for fine adjustment.
Setting up slightly different pitches for the right and left gives thickness to the sound.
2400_app_e.book 54 ページ 2005年4月28日 木曜日 午後1時14分