Filter
Top Products
87
Algorithm List
Algorithm List
3band Isolator
Sharply cuts off components by frequency band to eliminate undesired sounds. Useful to eliminate undesired
sounds and take out only specific sounds from a CD. Isolator can make sounds completely perish, unlike ordinary
equalizers that leave some sounds even with the gains of the respective frequency bands set to the minimum.
fig.08-69
Parameter (full name) Setting Function
Iso (3-band Isolator): Divides the input sound into three frequency bands to abstract or eliminate the
sound.
Sw (Switch) On, Off Turns the 3-band isolator on or off.
AntiPhase LoLev (Anti-phase Low Level)
0–100 Sets the amount of the low frequency band sound should
be muted.
AntiPhase MidLev (Anti-phase Middle Level)
0–100 Sets how much of the middle frequency band sound should
be muted.
LoMixSw (Anti-phase Low Mix Switch) On, Off Mutes or leaves the low frequency band sound.
MidMixSw (Anti-phase Middle Mix Switch) On, Off Mutes or leaves the middle frequency band sound.
LowLvl (Low Level) -60– +4 dB Increases or decreases frequency bands in the low
frequency band.
MidLvl (Middle Level) -60– +4 dB Increases or decreases frequency bands in the middle
frequency band.
HiLvl (High Level) -60– +4 dB Increases or decreases frequency bands in the High
frequency band.
3 Band
Isolator L
3 Band
Isolator R
Input L
Input R
Output L
Output R
Muting the bass
Set up as follows to eliminate low frequency band sounds such as bass sounds.
Anti-phase Low Mix Switch (AntiPhase LoMixSw): On
Anti-phase Low Level (AntiPhase LoLev): Relatively High
Muting vocals
Set up as follows to eliminate middle frequency band sounds such as vocal sounds.
Anti-phase Middle Mix Switch (AntiPhase MidMixSw): On
Anti-phase Middle Level (AntiPhase MidLev): Relatively High
Muting noise
Identify the frequency band of the noise and set the relevant Level (LowLvl, MidLvl or HiLvl) to -60 dB.
2400_app_e.book 87 ページ ２００５年４月２８日 木曜日 午後１時１４分