Filter
Top Products
Implementing a Basic Application
SR2MAN01 11/2007 163
Launching the
Program
To launch the program, proceed as follows:
The Basic Points This simple application example teaches the user how to enter a ladder diagram.
The following points should be remembered:
z When a or a is flashing, use the Shift button to add an element (contact, coil
or graphic link element),
z When an element is flashing (I, Q, No., etc.), it is possible to use the Shift + Z2
and Z3 arrows on the arrow keypad to select the required element,
z It is also possible to use the Z1 to Z4 arrows on the arrow keypad to move around
the ladder diagram.
Step Action Screen Comment
1
Now confirm the changes.
YES flashes.
2
The main menu re-appears.
PROGRAMMING is selected
(flashes).
3
RUN/STOP is selected (flashes).
4
Now start the program.
5
The main menu re-appears.
Menu / OK
VALIDER MODIFS.?
NON
OUI
Menu / OK
PROGRAMMATION
CONFIGURATION
RUN/STOP
PARAMETRES
2 fois
PROGRAMMATION
CONFIGURATION
RUN/STOP
PARAMETRES
Menu / OK
RUN PROG ?
NON
OUI
Menu / OK
1234 BCDE
1234
JEU 25 SEP 16:40
RUN LD