Filter
Top Products
Input/Output Screen
36
SR2MAN01 11/2007
TEXT and DISPLAY screen
Description The display functions are used to display text or numerical values (current value,
preset value, etc.) on the LCD display instead of the INPUTS-OUTPUTS:
z In LD mode: A TEXT function is active,
z in FBD mode: A DISPLAY function is active.
Illustration:
If several display functions are active simultaneously:
z In LD mode: The highest block number is displayed. There are 16 TEXT-type
blocks numbered from 1 to 9 then from A to G,
z In FBD mode: The superposition of all of the FBD DISPLAY screens is displayed,
for up to 32 blocks. If more than 32 FBD DISPLAY blocks are active, the screens
of the 32 FBD DISPLAY blocks with the lowest numbers are superposed.
Switching
Between the
Screens
Switching between the screens
It is however possible to go from the TEXT (LD) or DISPLAY (FBD) screen to the
INPUTS-OUTPUTS screen and vice-versa.
To do this, proceed as follows:
Note: The display functions are programmable only from the programming
software (see the on-line help for the programming software for more information).
2
Menu / OK
2
V a l u e c o u n t e r 1
C 1 C = 0 0 0 0 1
D a t e
2 8 / 1 1 / 2 0 0 3
Step Step
Action Press and hold down the Shift key and press the Menu/OK key.