Filter
Top Products
MONITORING Menu
54
SR2MAN01 11/2007
Parameter
Modification
To modify the parameters, proceed as follows:
Step Action
1 Use the navigation keys to move the cursor over the element to modify: Step 1 of the
element entry (see Method for Entering a Contact or Coil, p. 43) procedure.
2 At the same time, hold down Shift and the Param key to open the parameter window.
3
Use the navigation keys to move to the cursor over the modifiable parameters: .
4 Change the parameter value using the keys + and -.
5
Confirm the modifications by pressing
Menu/OK
, which will open the confirmation window.
Confirm a second time by pressing Menu/OK to save.
6 Confirm again with Menu/OK.
Result: Return to the parameter screen.
7 Confirm again with Menu/OK.
Result: Return to the LD diagram screen.