Filter
Top Products
Debugging an Application
166
SR2MAN01 11/2007
Introduction
Module in RUN
Mode
Once an application has been entered in ladder diagram form, debugging tests still
must be run.
The first step is to set the smart relay to RUN. To do this, in the RUN/STOP option
in main menu and select RUN.
From this moment on, the smart relay handles the physical inputs and outputs
according to the instructions entered in the ladder diagram.
Viewing Status: In RUN mode, the states of inputs and outputs are displayed on the main screen:
When inputs or outputs are activated, they appear in reverse video (using white on
a black background).
This concept is referred to as the dynamic operation of smart relay functions. The
terms RUN and dynamic have a similar meaning in the remainder of this document.
Prompt Element
1 Display input status
2 Display run mode (RUN/STOP) and mode in use.
3 Displays date and time for products with clocks.
4 Output status display.
5 Contextual menus / pushbuttons / icons indicating operating modes.
4
4
2
Menu / OK
2
1 2 3 5 6
R U N L D
M O N 2 2 S E P 1 5 : 5 1
1 2 3 4
4
2
1
2
3
4
5