Filter
Top Products
PROGRAMMING Menu
SR2MAN01 11/2007 49
Deletion and Insertion of Diagram Lines
Deletion
Diagram lines are deleted line-by line. The procedure is the following:
Insertion The procedure is the following:
Note: Accessible only in LD mode / smart relay in STOP mode.
Step Action
1 Place the cursor over the line to delete.
2 Delete all the elements in the line (see Method for Entering a Contact or Coil, p. 43):
(Links, contacts and coils) to obtain an empty line.
3 Press the Shift key to display the contextual menu.
Illustration:
Simultaneously pressing Shift and Del opens the confirmation window.
4 Confirm by pressing Menu/OK.
Note: It is possible to delete all diagram lines contained in the smart relay. In order
to do this, select the CLEAR PROG. option from the main menu, and confirm the
deletion of all the control diagram lines.
Menu / OK
ins. - +Del.
Step Action
1 Place the cursor over the line located immediately below the line to create.
2 Press the Shift key to display the contextual menu.
3 Press the Ins key (while holding down the Shift key) to create the line.