Star Micronics NX-15 Printer User Manual


 
123
1-2
1-3
1-4
1-5
1-6
1-7
1-8
2-1
This switch selects the default character style. If
this switch is on the default character style is nor-
mal draft characters. If this switch is off the default
character style is Near Letter Quality (NLQ)
characters. This switch is set on at the factory.
This switch selects the print style of zeroes. If this
switch is on, normal zeroes are printed. If this
switch is off, slashed zeroes are printed. This switch
is set on at the factory.
This switch determines the default bottom margin.
When this switch is on, the bottom margin is not set
at power-on. When this switch is off, the bottom
margin is automatically set to 1 inch. This switch is
set on at the factory.
This switch disables the paper-out detector. If this
switch is on, the printer will signal the computer
when it runs out of paper and printing will stop. If
this switch is off, the printer will ignore the paper-
out detector and will continue printing. This switch
is set on at the factory.
This switch controls the status of SELECT IN
signal of the parallel interface. If this switch is on,
this signal is held to LOW. If this switch is off, the
signal goes HIGH when the printer cannot get data.
This switch is set on at the factory.
This switch selects the default character set. If this
switch is on, the default character set is character
set #1. If this switch is off, the deafult character set
is character set #2. If switch 2-5 is on, this switch
have no effect: This switch is set on at the factory.
When this switch is on, the computer must send a
line feed command each time to advance the paper.
When this switch is off, the printer will automatical-
ly advance the paper one line every time it receives
a carriage return. (For example, most BASIC’s send
a line feed with every carriage return; in this case,
this switch should be on.) This switch is set on at the
factory.
This switch controls the RAM. When this switch is
on, the download character definitions are ignored
and the RAM is used as a print buffer. When this
switch is off, the download character definitions are