Filter
Top Products
—
170
SEE
PURPOSE
CODE
(decimal ASCII)
(hex ASCII)
REMARKS
PURPOSE
Disables paper-out detector.
CODE
(ESC) “8”
(decimal ASCII)
27 56
(hex ASCII)
IB 38
REMARKS
This command causes the printer to
disregard the signal sent by the paper-
out detector. The paper-out signal nor-
mally sounds the printer bell and stops
printing until paper is inserted and the
printer is reset. DIP switch 1-5 can also
set to disable the paper-out detector.
Chapter 6
Enables paper-out detector.
SEE
PURPOSE
CODE
(decimal ASCII)
(hex ASCII)
REMARKS
SEE
(ESC)
“9”
27
57
IB 39
This command restores
the paper-out detector.
Chapter 6
the function of
Selects uni-directional printing.
(ESC)
“u”
1
27 85
1
IB
55
01
This command causes all subsequent
printing to be done in uni-directional
printing. Uni-directional printing is
useful in printing tables or charts, since
it ensures that vertical columns of
characters will be aligned.
NOTE: The character “l” (decimal code
49, hexadecimal code 31) can be used
instead of ASCII 1.
Chapter 6