Filter
Top Products
1-
149
PURPOSE
Sends a one-time reverse feed of
n/216 inch.
CODE
(ESC)
<<.9>
n
(decimal ASCII)
27
1;6
n
(hex ASCII)
IB 6A
n
REMARKS
This command causes the printer to
reverse the paper n/216 inch. It does not
change the current value of line spacing
and it does not cause a carriage return.
The value of n must be between O and
255.
SEE
Chapter 5
PURPOSE
Sets print position to n lines.
CODE
(ESC) “f” 1
n
(decimal ASCII)
27 102 1 n
(hex ASCII)
IB 66 01 n
REMARKS
This command sets the next print posi-
tion to the nth line from the top of the cur-
rent page.
NOTE: The character “l” (decimal code
49, hexadecimal code 31) can be used
instead of ASCII 1.
SEE
Chapter 5
■ Form feed and related commands
PURPOSE
Advances the paper to the top of
the next page (form feed).
CODE
(FF)
(decimal ASCII)
12
(hex ASCII)
Oc
REMARKS
The actual length of a page ejected by a
form feed is set either by setting of the
DIP switch 1-1 or through various codes
(see below). This command works as the
paper eject command when the optional
automatic sheet feeder is installed.
SEE
Chapter 5