Filter
Top Products
135
PURPOSE
Selects character set #2.
CODE
(ESC) “6”
(decimal ASCII)
27 54
(hex ASCII)
IB 36
REMARKS
This command selects character set #2
when the DIP switch 2-5 is set off.
You can select character set #2 as the
power-on default by turning DIP switch
l-7 offwhile the DIPswitch2-5 issetoff.
SEE
Chapter6
PURPOSE
Selects character set#l.
CODE (ESC) “7”
(decimal ASCII)
27 55
(hex ASCII)
IB 37
REMARKS
This command cancels character set #2
and selects character set #1 when the
DIP switch 2-5 is set off. You can select
character set #1 as the power-on default
by turning DIP switch 1-7 on while the
DIP switch 2-5 is set off.
SEE
Chapter 6