Filter
Top Products
175
PURPOSE
CODE
(decimal ASCII)
(hex ASCII)
REMARKS
SEE
PURPOSE
CODE
(decimal ASCII)
(hex ASCII)
REMARKS
SEE
PURPOSE
CODE
(decimal ASCII)
(hex ASCII)
REMARKS
SEE
Resets the printer.
(ESC)
“@”
27 64
IB
40
This command reinitializes the printer.
The print buffer is cleared, and the form
length, character set, bottom margin,
and international character set are all
reset to the values defined by their
respective DIP switches. The main dif-
ference between the (ESC) “@” com-
mand and turning the printer off and
back on again is that download
characters and macro instructions are
presemed with this command.
Chapter 6
Selects auto feed mode.
(ESC) (EM) 4
27 25
4
IB 19 04
This command causes the printer to
select the auto sheet feeding mode. This
command is ignored when the optional
automatic sheet feeder is not mounted on
the printer.
Chapter 6
Selects auto feed mode.
<<79 66>!
( ( ‘j; “J “J
40 40
28 28 34
29 29
Same as (ESC) (EM) 4, above.
Chapter 6