Filter
Top Products
I
154
CONTROLLING THE HORIZONTAL PRINT POSITION
This section described commands that move the print head
and restrict its printing range (such as setting margins and
tabs).
PURPOSE
CODE
(decimal ASCII)
(hex ASCII)
REMARKS
SEE
PURPOSE
CODE
(decimal ASCII)
(hex ASCII)
REMARKS
SEE
Returns print head to the left
margin (carriage return).
(CR)
13
OD
This command returns the print head to
the left margin. If DIP switch 1-8 has
been set off, this command will also
cause a line feed character to be
generated after the carriage return,
thereby advancing to the beginning
the next print line automatically.
Chapter 5
Sets the left and right margins.
(ESC) “X” nl n2
27 88 nl n2
IB 58 nl n2
This command sets the left margin to
of
nl
characters and the right marg~ to n2.
The values of
nl and n2 must be be-
tween 1“and 255, and n2 should be
greater than nl. You can set the left and
right margins manually on the control
panel.
NOTE: Changingthe printpitchafter
the margins have been set does not
changethemargins—theystayinexact-
ly thesameplaceonthepage.
Chapter5