Filter
Top Products
PURPOSE
Moves the print head to
horizontal tab position.
the next
CODE
(HT)
(decimal ASCII)
9
(hex .ASCII)
09
REMARKS This command causes the print head to
advance to the next horizontal tab posi-
tion. The horizontal tab positions are set
at power-on to print positions 8, 16, 24,
etc. (to the maximum print position).
SEE
PURPOSE
CODE
(decimal ASCII)
(hex ASCII)
REMARKS
Chapter 5
Sets horizontal tab positions.
(ESC)
“D” nln2n3... O
27
68 nln2n3... O
IB
44
nln.Zz3... 00
This command cancels all current
horizontal tab positions and sets those
defined at print positions nl, n2, n3, etc.
The maximum number of horizontal tab
positions allowed is 28. The ASCII O
character is used as a command ter-
minator. Each horizontal tab position
must be specified in ascending order.
SEE
Chapter 5
PURPOSE
Sets horizontal tab positions
every
n characters.
CODE
(ESC) “e” O n
(decimal ASCII)
27
101 0 n
(hex ASCII)
IB 65 00 n
REMARKS This command cancels all current
horizonal tab positions and sets those
every n characters
NOTE: The character “O”(decimal code
48, hexadecimal code 30) can be used
instead of ASCII O.
SEE Chapter 5
—.