Filter
Top Products
152
PURPOSE
CODE
(decimal ASCII)
(hex.ASCII)
REMARKS
SEE
PURPOSE
CODE
(decimal ASCII)
(hex ASCII)
REMARKS
SEE
PURPOSE
CODE
(decimal ASCII)
(hex ASCII)
REMARKS
SEE
Advances paper to the next ver-
tical tab position.
(VT)
11
OB
This command causes the paper to be ad-
vanced to the next vertical tab position,
or the top of the next page, whichever is
first. If the vertical tab positions are not
set, this command works as a line feed
command.
Chapter 5
Sets vertical tab positions.
(ESC) “B” nl n2 n3 ...
0
27 66 nl n2 n3 ...
0
IB 42 nl n2 n3 ... 00
This command cancels all current ver-
tical tab positions and sets those defined
at lines nl, n2, n3, etc. The maximum
number of vertical tab positions allowed
is 16. The ASCII Ocharacter is used as a
command terminator. Each vertical tab
position must be specified in ascending
order.
Chapter 5
Selects vertical channels.
(ESC) “l” nO
27
47
nO
IB 2F
no
This command selects one of the multi-
ple vertical channels determined by the
value of nO. The value of nOmust be be-
tween Oand 7.
Chapter 5