Filter
Top Products
166
OTHER COMMANDS
PURPOSE
Sets the value of the eighth data
bit to logical 1.
CODE
(ESC) “)”
(decimal ASCII)
27 62
(hex ASCII)
IB 3E
REMARKS
This command forces the eighth data bit
of each subsequent character sent to the
printer to logical 1. This code allows
users with a 7-bit interface to access
those characters whose ASCII code is
greater than 127. This code should not
be used to transmit printer control
codes.
SEE
PURPOSE
CODE
(decimal ASCII)
(hex ASCII)
REMARKS
SEE
Chapter 6
Sets the value of the eighth data
bit to logical O.
(ESC) “= “
27
61
IB 3D
This command forces the eighth data bit
of each subsequent character sent to the
printer to logical O.This code should not
be used to transmit printer control code.
Chapter 6