Filter
Top Products
134
PURPOSE
CODE
(decimal ASCII)
(hex ASCII)
REMARKS
SEE
PURPOSE
CODE”
(decimal ASCII)
(hex ASCII)
REMARKS
SEE
Cancels italic characters.
(ESC)
“5”
27
53
IB 35
This command causes the printer to
cancel italic printing and select the
standard reman characters. This com-
mand is ignored when the “Italic Panel”
mode is selected at power-on.
Chapter 4
Selects an international character
set.
(ESC)
“R”
n
27 82
n
IB
52
n
This command selects the international
character set according to the value of n
as shown in the table below:
n Character set n Character set
O U.S.A.
6 Italy
1 France
7 Spain
2 Germany
8 Japan
3 England
9 Norway
4 Denmark I
10 Denmark II
5 Sweden
You can “select a specific international
character set (except Japan, Norway,
and Denmark type II), as a power-on
default by adjusting the settings of DIP
switches 2-2, 2-3, and 2-4.
Chapter 6