Filter
Top Products
I
172
PURPOSE Enlarges characters in whole or in
part; cancels same.
CODE
(ESC)
“h”
n
(decimal ASCII)
27 104
n
(hex ASCII)
IB 68
n
REMARKS
This special command enlarges
characters following the command until
the enlargement is cancelled. The values
of n have the following effects.
n Effect
o
1
2
3
4
5
6
Cancels enlargement
Double-high, double-wide
Quadruple-high, quadruple-wide
Double-high, double-wide (Lower
half only)
Double-high, double-wide (Upper
half only)
Quadruple-high, quadruple-wide
(Lower half only)
Quadruple-high, quadruple-wide
(Upper half only)
SEE
Chapter 6
PURPOSE
Expands the printable area.
CODE
(ESC) “6”
(decimal ASCII)
27 54
(hex ASCII)
IB 36
REMARKS This command causes the printer to use
the high-order control code area as a
printable character area when the DIP
switch 2-5 is set on.
SEE
Chapter 6